The DC-200 Coarse diamond grinding wheel from Tormek is a coarse grinding wheel with a grit size of 360. It ensures efficient stock removal and quickly repairs blunt or damaged cutting tools. The high removal rate can also be used for resharpening turning knives, for example when changing the bevel angle or creating a fingernail edge. Suitable for Tormek T-4, Tormek T-3 and predecessor models with stone diameter 200.
Each diamond blade comes with 150 ml ACC-150 rust protection concentrate. Always add the concentrate to the water during wet grinding to prevent the grinding wheel from rusting. Add 10 ml of concentrate per 250 ml of water (approx. 4 %). We recommend always grinding wet with the diamond grinding wheel, as this extends the life of the wheel and provides a smoother surface. You can also grind dry.
Special features of the diamond grinding wheel
-
High stock removal rate - Grit 360 for fast repair of damaged and blunt cutting edges, also suitable for resharpening or reshaping the bevel.
-
No shrinkage of the wheel diameter - Guarantees permanently consistent sharpening results
-
Allows grinding of numerous types of steel, including all common turning blade steels such as HSS, Cryo, Pro PM, Razor M42 steel.
-
side grinding surface - For precisely and completely flat dressed cutting edges / chamfers such as for chisels, knives or planes.
-
Diamond coating for enormous durability of the grinding surfaces
.
Which materials can be sharpened with the diamond grinding wheel
With this diamond wheel, you can sharpen and resharpen all woodturning knives made of HSS, Cryo, Pro PM, M42. Also carbon steel, other high-alloyed steels, hard metals, but also ceramics or glass.
.
Disc durability for consistent grinding results
The diamond coating of the Tormek DC-200 grinding wheel is particularly durable. A major advantage of the grinding wheel is that the diameter and grinding surfaces are durable and consistent, which means that once you have found the right sharpening settings for your tools, you do not have to react to a diminishing grindstone. All sharpening settings can be reproduced quickly.
Cutting edges / bevels dressed precisely and completely flat without fillets
The side coating of the wheel provides a completely flat grinding surface. Ideal for knives, chisels, gouges and chisel feet
Note: For sharpening on the side grinding surface, also use the MB-100 multi holder from Tormek.
Application: Protection against corrosion and more
Wet grinding uses water to cool the steel and the diamond grinding wheel. This is why the diamond wheel is supplied with the ACC-150 rust protection concentrate from Tormek. The concentrate must be added to the water during wet grinding to prevent the steel body of the wheel from corroding (rusting).
Mixing ratio: 4 ml - 5 ml concentrate to 100 ml water. Prepare an approx. 4 % - 5 % solution.
Compatibility
Tormek's DC-200 diamond grinding wheel fits the Tormek T-4 Original, Tormek T-4 Bushcraft, Tormek T-3 and older models with a grinding wheel of 200 mm in diameter.
Product Safety / Manufacturer Information
Tormek AB
Telefon: +46 581-147 90
E-Mail: info@tormek.se
Torphyttevägen 40, 711 34 Lindesberg, Sweden,
The economic operator responsible for this product established within the EU is
TIXIT Bernd Lauffer GmbH & Co. KG
Telefon:+49 7720 9720-40
E-Mail:info@tixit.de
Lupfenstraße 52
78056 Villingen-Schwenningen
